Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Logan Square
Dryer vent cleaning in Logan Square usually runs between $140 and $260 for a standard single-family home or condo, and between $180 and $320 when we’re working through the roof access on a two- or three-flat. Most jobs take 60 to 90 minutes once we’re on site, and we book by appointment so you’re not waiting around all day. If you live in a greystone off Logan Boulevard or a worker’s cottage near Palmer Square, we know exactly how your vent is likely routed and what tends to clog it. Call (877) 265-6720 for a free estimate, and we’ll get you scheduled before the lint load gets worse.
Why Crossroads Chimney Sweep Is Logan Square’s Preferred Dryer Vent Cleaning Company
Logan Square’s housing stock is dense, old, and built tight to the street. That changes how dryer vents behave. In a neighborhood where two- and three-flats share walls, roof lines, and sometimes flues, you need a technician who understands what’s happening behind the plaster before they even put a camera in the vent. That’s what we do. Our team works on century-old brick buildings here every week, and we’ve seen the specific failures that come from retrofitted furnaces, original clay-tile liners, and DuraFlex in Logan Square installations where dryer terminations were never really planned.
Norm Szczepanski built Crossroads Chimney Sweep around one idea: bring real chimney and ventilation expertise to the fire-safety work most homeowners only think about once a year. We carry Dryer Vent Cleaning equipment and materials from brands like Famco and Gelco, because a proper termination fitting matters as much as the cleaning itself. When you call us, you’re getting a specialist, not a general handyman who squeezes your vent in between gutter repairs.
Our customers in Logan Square tell us the same thing over and over: they want someone who explains what was actually done and why. We document every job with camera photos before and after, so you see the lint blockage that was there and the clear run after we finish. No mystery, no upsell pressure. If your vent is fine and just needs routine cleaning, we’ll say exactly that.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Logan Square
Every dryer vent job in Logan Square starts the same way: we look at how the vent is routed, where it terminates, and what’s been building up inside. From there, the work falls into a few categories depending on what we find. Here’s what we most commonly handle for homes in 60647.
Dryer Vent Cleaning
The standard service. We run a rotating brush and a high-powered vacuum through the entire duct run, from the dryer connection to the termination point. In Logan Square, that run is often longer than you’d think, especially in two-flats where the dryer sits on an interior wall and the vent snakes up through a former coal chute or a wall cavity before it reaches the roof. Longer runs trap more lint, and we clean the full length, not just the first few feet behind the machine.
Level 2 Inspection
A Level 2 inspection is what we do when a vent has been neglected for years, when a building has changed hands, or when someone reports a backdraft or moisture smell in an adjacent unit. We run a camera through the entire vent and document every joint, offset, and termination. In a Logan Square three-flat, this is the only way to know for sure whether lint is collecting behind a wall or blocking a shared chase. You see the footage. We walk you through what it means.
Flue Liner Assessment
This is where dryer vent work in Logan Square overlaps with chimney work. If your dryer vents into an old masonry flue or shares a chase with a furnace or boiler, the condition of that clay-tile liner matters. Freeze-thaw cycles across Chicago winters have cracked thousands of original liners in this neighborhood. When a liner is compromised, dryer exhaust doesn’t exit cleanly; it leaks into wall cavities or pushes back into the building. We assess the liner, show you the damage if it’s there, and explain your options, including HeatShield resurfacing when restoration makes more sense than a full tear-out and reline.
Vent Rerouting and Termination Repair
Sometimes cleaning isn’t enough. In tight Logan Square lots, we regularly see terminations blocked by snow guards, parapets, or rerouted roof work. We also find dryers tied into flues they should never have been connected to in the first place. When that’s the case, we’ll reroute the termination to an exterior wall or a dedicated roof cap, install a proper backdraft damper, and restore the airflow the dryer needs. If a famco termination fitting is called for, we have it on the truck.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Logan Square
We stock and install parts from brands that most vent-cleaning-only companies don’t bother with. Famco termination caps and dampers, Gelco vent fittings, Olympia Chimney components, and HeatShield for flue resurfacing when a liner needs restoration. Why does that matter in Logan Square? Because the houses here were built before modern venting codes existed, and off-the-shelf hardware doesn’t always fit a 1920s roof stack or a shared party-wall chase. We bring the right materials to your door, and we keep high-demand fittings on hand so we’re not ordering parts and leaving you with a disconnected dryer for a week.
Common Dryer Vent Cleaning Problems We See in Logan Square Homes
- Shared party-wall flues. A first-floor dryer tied into a flue that also serves the second-floor furnace is a recipe for backdrafting. Lint blocks the damper, exhaust spills into the upstairs unit, and no amount of pleated-filter cleaning fixes it. We inspect these shared chases with a camera before we ever recommend a repair.
- Cracked clay-tile liners in greystones. Chicago’s freeze-thaw cycles are relentless on the original liners in these 1880s to 1920s buildings. When a liner cracks, dryer exhaust leaks into wall cavities and attic spaces, carrying moisture and lint with it. We flag this on nearly a third of the older greystone calls we run in Logan Square.
- Blocked roof terminations on tight lots. Logan Square’s rows of attached buildings mean roof stacks are often sheltered by parapets or hemmed in by snow guards. Lint builds up at the top, airflow drops, and the dryer overheats. It’s a slow failure that most owners don’t notice until clothes take two cycles to dry.
- Long, offset-heavy interior runs. Many Logan Square two-flats route dryer vents through interior wall cavities or former coal chutes, with multiple elbows and twenty-plus feet of duct. Every bend is a lint trap. If your vent was never designed for the dryer you actually own, it’s working against you from day one.
Pricing for Dryer Vent Cleaning in Logan Square, IL
A standard dryer vent cleaning for a single-family home or condo in Logan Square runs $140 to $260. Two- and three-flats with roof access, longer interior runs, or shared-chase complications typically run $180 to $320. If we need to reroute a termination, replace a blocked roof cap, or address a cracked liner, we quote that separately before any work begins, so you never get a surprise invoice at the door.
What affects the price: the length of the run, the number of offsets, roof versus wall access, and whether the vent shares a chase with another unit. We give a flat price before we start, and the camera inspection is included so you can see exactly what we’re cleaning. Call (877) 265-6720 for a free estimate. We’ll give you a real number, not a vague “it depends.”
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Logan Square
Our team works across Chicago’s near-northwest side every week. If you’re in Avondale, West Town, Belmont Cragin, or Irving Park, we bring the same Logan Square level of camera documentation and brand-specific repair work to your block. Same scheduling process, same flat-quote policy. Call the main line and we’ll route you to the right crew.
Serving Logan Square, IL — Our Local Coverage Area
We’re based in the Logan Square area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Logan Square
Yes, and it’s one of the most common problems we find in Logan Square’s attached housing. If your dryer terminates into a party-wall flue that also serves your neighbor’s furnace or boiler, lint buildup in that shared chase can block the barometric damper and push exhaust back into the adjacent unit. The neighbor upstairs might smell laundry exhaust, feel moisture on their walls, or get a carbon monoxide reading from their utility room. The fix is usually to reroute the dryer to its own dedicated exterior wall termination with a proper backdraft damper. Call (877) 265-6720 and we’ll camera the chase and tell you exactly what’s happening in your building.
Once a year is the baseline for any occupied unit in a Logan Square greystone or worker’s cottage. If you share a flue with another unit, if your vent run is over 15 feet with multiple elbows, or if you dry more than three loads a week, every six months is safer. Century-old buildings in 60647 were never designed for modern dryer airflow, and the margins for error are tighter than in newer construction. Annual cleaning is cheap insurance against the lint fires and moisture damage we see every season.
Creosote is primarily a chimney term, but the same gradation applies to lint deposits in a dryer vent when heat and moisture bake the debris into a hardened layer. First-degree is loose, fluffy lint that brushes away easily. Second-degree is compacted, sticky, and layered; we need scraper tools and multiple passes. Third-degree is service in Dryer Vent Cleaning that has glazed from heat, forming a hard, tar-like coating that can’t be brushed alone. In a Logan Square home with a long, offset-heavy run, third-degree buildup on the vent walls is a real fire hazard and the reason we never rush a cleaning call.
Yes, and we recommend it. Since Crossroads Chimney Sweep handles both chimney sweeping and dryer vent cleaning, one visit covers both systems. We’ll run the camera through your dryer vent and do a visual or camera inspection of your chimney flue in the same appointment. For Logan Square homeowners with a wood-burning fireplace and a dryer in the same building, this is the most efficient way to get both fire-risk systems on a documented maintenance schedule. Call (877) 265-6720 and we’ll book both at once.
It’s common, though not always ideal. Many Logan Square worker’s cottages route the dryer vent through a former chimney or a dedicated roof stack, because the original floor plan didn’t leave a direct path to an exterior wall. The concern is length and access. A roof termination through a cottage chimney is often a long vertical run, and vertical lint falls back toward the dryer if airflow drops. Many of these terminations are also blocked by snow guards or shadowed by parapets on adjacent buildings. It’s worth having us camera the run and confirm the termination is clear and the damper is working. A lot of “my dryer takes two cycles” calls in Logan Square come down to exactly this setup.
One More Thing About Logan Square Dryer Vents
In Logan Square’s tight two- and three-flats, dryer vents often terminate into shared party-wall chases or roof stacks that also serve a neighbor’s furnace. That shared space creates a cross-contamination risk: lint and moisture from one unit can backdraft into another’s living space. We rarely see this in Avondale, where lot spacing gives each building more independent venting. Here on Flushing Avenue, Kimball, or Diversey, the buildings breathe differently.
On a three-flat along Logan Boulevard, our tech found a first-floor dryer venting into a party-wall flue shared with the second-floor furnace. Lint was blocking the barometric damper and causing exhaust to spill into the upstairs unit. We ran a camera, cleared the chase, and rerouted the dryer termination to an exterior wall with a proper backdraft damper. Safe draft restored for both units. That’s the kind of job you only find in a neighborhood built this close together, and it’s why we treat Logan Square vent work as its own specialty.
Ready to Clear Your Dryer Vent in Logan Square?
Whether you’re in a greystone off Palmer Square, a brick two-flat on Kedzie, or a worker’s cottage near the Milwaukee Avenue corridor, we’ll show up with the right camera, the right brushes, and the right materials for the job. You’ll see the before and after, and you’ll know exactly what was done. Call Norm and the team at Crossroads Chimney Sweep at (877) 265-6720 for a free estimate. A clear vent is the cheapest fire insurance in a building this old.
Written by Norm Szczepanski, Owner at Crossroads Chimney Sweep, serving Logan Square from our Belmont Cragin shop.