Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Albany Park, IL
Chimney repair in Albany Park usually means working on a 1910s or 1920s brick two-flat or three-flat with original clay tile flues that have seen a century of Chicago freeze-thaw cycles. Most calls we get from the 60625 ZIP involve spalled brick crowns, cracked flue tiles, or missing caps on shared chimney stacks serving multiple apartments. Crossroads Chimney Sweep has served Albany Park since 2014, and we carry the industry-grade materials these older buildings need: HeatShield, Gelco, Olympia Chimney, and Famco components. Call (877) 265-6720 when you need a specialist who knows multi-family flue systems, not a generalist with a ladder.
Why Albany Park Homes Are Different
Albany Park’s building stock is overwhelmingly brick two- and three-flats from the 1910s through the 1930s, concentrated along the Lawrence, Kedzie, and Kimball corridors. These buildings were built around coal furnaces long before modern chimney liners existed. The original flues are clay tile, and after decades of coal soot, gas conversion, and Chicago’s lake-effect weather, many show cracked tiles, spalling mortar, and missing caps. Rooftop access is often tight – shared rear porches, narrow gangways between buildings, and courtyard layouts mean the work is slower and more careful than a suburban single-family roof.
Freeze-thaw is the dominant failure mode here. Water gets into the crown and top courses of brick, freezes, expands, and pops the mortar joint. Ice dams form at the flue top in winter, and summer storms push water into any gap. That’s why crown repair and cap replacement are just as important as sweeping in Albany Park. We also see something unique to dense multi-family housing: flues cross-connected between units. Two apartments sharing a stack may actually share a flue passage, which is a landlord-liability problem a single-family sweep would never find. Many households here also burn wood in small, frequent fires rather than occasional recreational ones, which changes the creosote profile we clean.
Styles & brands we work with





Our Main Albany Park Services
Most Albany Park homeowners and landlords call us for one of two things: a chimney sweep before burning season, or dryer vent cleaning when a stacked unit’s dryer starts taking twice as long to dry clothes. Here’s how each works in this neighborhood.
Chimney Sweep in Albany Park
Chimney sweeping in Albany Park often means cleaning multiple flues in a single shared stack, one per unit, with each flue serving a different fireplace or furnace. We bring camera inspection gear and document every flue, because in older two- and three-flats we regularly find cross-connected passages that no one has ever mapped. The work includes removing creosote, checking the cap and crown from the roof, and giving you a written report with photos. Whether you own a single-flue greystone or a three-flat on Lawrence, the process is the same: inspect first, show you what we found, then sweep. Learn more about what’s included on our Chimney Sweep in Albany Park page.

Dryer Vent Cleaning in Albany Park
Dryer vents in Albany Park two- and three-flats are often long, awkward runs through interior walls, sometimes terminating through a roof cap shared with other vents. Lint builds up faster in these layouts than in a suburban single-family home with a short exterior wall run. We use Famco vent termination components when repairs are needed, and we clean the full run from the dryer to the exterior cap. For apartments, this is a fire-safety issue landlords cannot ignore. See our Dryer Vent Cleaning in Albany Park page for full details on how we handle stacked-unit buildings.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Albany Park

Chimney repair in Albany Park is most often about water. The 1910s and 1920s brick stacks on these two- and three-flats lose their crowns and caps to freeze-thaw cycles, and once water gets into the flue, the clay tiles start to crack and spall. We also replace flue liners in buildings that never had one installed, or whose original clay liner has failed after serving a coal furnace for decades before gas conversion. Crossroads Chimney Sweep has served Albany Park since 2014, and we approach every repair the same way: camera inspection first, then a written quote with photos, then the repair using the right material for the specific failure. See our Chimney Repair hub for the full scope of what we do.
Chimney Cap Installation
Signs you need it
No cap on the flue, a rusted-through old cap, or evidence of rain, birds, or debris inside the flue.
What it costs in Albany Park
Chimney cap installation in Albany Park typically runs $220 – $465, depending on flue size and whether a custom stainless cap is needed for an odd-shaped clay tile.
How we do it
We measure the flue opening, select a stainless or copper cap sized to the tile, secure it with mechanical fasteners, and verify the draft with a smoke test.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted, missing, or the mesh is clogged with soot and no longer venting properly.
What it costs in Albany Park
Chimney cap replacement in Albany Park usually costs $180 – $340 for standard single-flue stainless caps, with multi-flue caps on shared stacks running higher.
How we do it
We remove the old cap, check the flue tile underneath for damage, install the replacement, and confirm the fit with a visual inspection from the roof.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, rusted flashing visible at the roofline, or damp drywall in top-floor units after rain.
What it costs in Albany Park
Chimney flashing repair in Albany Park typically falls between $300 – $650, based on access and how much of the surrounding roof material must be lifted.
How we do it
We remove the old flashing, inspect the step and counter-flashing condition, replace with new metal, and seal the joint with a polyurethane caulk rated for masonry.
Chimney Crown Repair
Signs you need it
Cracked, spalled, or missing crown mortar, or brick faces popping off near the top of the chimney.
What it costs in Albany Park
Chimney crown repair in Albany Park runs $500 – $1,200 depending on crown size and whether we need to rebuild it entirely or patch and reseal.
How we do it
We grind out the damaged mortar, build forms if needed, pour a new crown with a proper drip edge, and seal the surface against future water intrusion.
What Chimney Repair Costs in Albany Park
| Item | Typical range in Albany Park |
|---|---|
| Chimney cap installation | $220 – $465 |
| Chimney cap replacement | $180 – $340 |
| Chimney flashing repair | $300 – $650 |
| Chimney crown repair | $500 – $1,200 |
Do I need a new liner or can the old one be repaired?
Many Albany Park clay tile flues can be resurfaced with HeatShield rather than torn out and replaced. We only recommend a full liner when camera inspection shows structural failure that resurfacing cannot fix. Call (877) 265-6720 for an honest assessment with photos.
Can you repair a shared chimney stack for a two-flat or three-flat?
Yes. We map every flue in the stack before any repair, because cross-connected flues are common in Albany Park’s older buildings. Landlords get a written report showing what each unit’s flue actually serves. Call (877) 265-6720 to schedule a camera inspection.
Brands We Service in Albany Park
We stock and install HeatShield, Gelco, Olympia Chimney, and Famco components for Albany Park jobs. These are the professional-grade materials we reach for on crown rebuilds, liner resurfacing, and dryer vent termination work. Parts are sourced locally, so most repairs don’t wait on long shipping delays. See our brands for the full list of what we carry.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Albany Park, IL
| Service | Typical range in Albany Park |
|---|---|
| Chimney sweep | $179 – $335 |
| Chimney cap installation | $220 – $465 |
| Chimney cap replacement | $180 – $340 |
| Chimney flashing repair | $300 – $650 |
| Chimney crown repair | $500 – $1,200 |
| Chimney liner installation | $2,900 – $6,500 |
| Dryer vent cleaning | $130 – $225 |
| Dryer vent cap replacement | $80 – $180 |
What pushes price up in Albany Park is access. Tight gangways, shared rear porches, and three-story rooftop work all add time and safety equipment. You’ll get a flat-price quote before we start, so there’s no surprise at the end.
Neighborhoods We Serve in Albany Park
Our Albany Park work covers the full 60625 ZIP and the blocks around it. Most jobs in this area are within a 15-minute drive of our Belmont Cragin base, so scheduling is straightforward and response times are short. We serve:
- Albany Park proper along Lawrence and Kedzie
- North Mayfair
- Ravenswood Manor
- The area around Horner Park
- Kimball corridor two- and three-flats
Service Area – Cities Near Albany Park
We also work in the neighborhoods and communities around Albany Park, including Lincoln Square, IL, Avondale, IL, North Center, IL, and West Ridge, IL. If you’re just outside the 60625 ZIP, call us and we’ll let you know when we can be there.
Serving Albany Park, IL — Our Local Coverage Area
We’re based in the Albany Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Albany Park
Most Albany Park addresses are a short drive from our Belmont Cragin base, so we can usually schedule within the same week. Emergency cases like active leaks into a top-floor unit can sometimes be squeezed in sooner. Call (877) 265-6720 and we’ll tell you our next available slot.
Most cap replacements, crown repairs, and flashing work do not need a separate permit. Larger structural rebuilds or liner installations may, and we’ll tell you at the quote stage if that’s the case. We’ll handle the paperwork if it’s required.
Yes, that’s a large share of our Albany Park work. We’re set up for multi-flue shared stacks and the access issues those buildings have. If you own or manage a building there, call (877) 265-6720 and we’ll schedule an inspection for the whole stack at once.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Albany Park Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Carmen Guzman"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Shanice Dawson"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Miguel Torres