Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Irving Park, IL
Chimney repair in Irving Park usually means one thing: an 80-to-100-year-old masonry chimney originally built for coal, now venting a modern gas furnace and water heater, starting to fail at the clay liner or the crown. Crossroads Chimney Sweep has served Irving Park since 2014, and our job here is less about fireplaces than about keeping those shared two-flat and bungalow flues safe, sealed, and code-compliant. Call (877) 265-6720 for a repair quote, a sweep, or a dryer vent inspection.
Why Irving Park Homes Are Different
The 60641 zip is packed with brick two- and three-flats, worker’s cottages, and Chicago-style bungalows built between roughly 1900 and 1935. That matters for chimney work because these homes almost never have modern insulated liners. What they have is single-wythe brick surrounding a clay tile flue that was sized for coal smoke, then repurposed when the coal boiler came out and a gas furnace went in. A lot of Irving Park chimneys are venting two appliances at once – a furnace and a water heater sharing one flue – which doubles the moisture load and accelerates liner breakdown.
The neighborhood’s location along the Kennedy Expressway and directly under the O’Hare flight path adds a second layer. Soot and diesel particulate settle on the brick, get drawn into the flue when the heat cycles on, and mix with the acidic condensation from gas combustion. The result is a glazed, corrosive creosote-like film and faster mortar erosion than you’d find in quieter parts of the city. We see it every week in Irving Park, and it’s one reason an annual inspection makes real sense here, even for homes with no wood-burning fireplace at all.
Freeze-thaw winters are the third factor. Chicago common brick from the 1920s is soft, and when water gets into a cracked crown or a failed wash, a few cold snaps will spall the brick face and widen the damage every year until something falls or leaks.
Styles & brands we work with
Our Main Irving Park Services
Chimney repair is the call we get most in Irving Park, but it usually starts with one of the two services below – either a routine sweep that turns up liner damage, or a dryer vent cleaning that reveals a blocked or disconnected run hidden behind a second-floor wall.
Chimney Sweep in Irving Park
In Irving Park, most sweeps are about gas appliances, not fireplaces. The flue that once carried coal exhaust through a two-flat now handles gas furnace condensation and soot settlement from the Kennedy and O’Hare traffic paths. A sweep here means removing glazed acidic buildup, checking the crown and cap, and confirming the flue is still sized correctly for what’s venting through it. We photograph everything so you can see the before and after with your own eyes. See exactly what an Irving Park sweep includes at Chimney Sweep in Irving Park.
Dryer Vent Cleaning in Irving Park
Dryer vents in Irving Park’s older buildings often run long and flat, snaking through ceilings or down inside walls to reach an exterior wall that was never designed for a dryer. Lint builds at the elbows, airflow drops, and the duct becomes a fire load and a moisture source. We clean the full run, verify the termination with Famco components where replacement parts are needed, and check that the vent isn’t dumping warm, lint-filled air into a soffit or onto a porch. Read the full scope at Dryer Vent Cleaning in Irving Park.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Irving Park
Chimney repair in Irving Park typically means restoring a coal-era masonry flue so it can safely vent a modern gas furnace and water heater again. The classic 60641 scenario is a two-flat where both appliances share one old clay-lined flue, the liner has cracked or the mortar joints between tiles have failed, and a home inspection flags the chimney before the place can be listed or refinanced. That’s the work we do most, and it’s why we stock and install systems like HeatShield, Gelco, Olympia Chimney, and Copperfield so we’re not dependent on whatever a supply house has on the shelf. Our full-scope chimney repair hub is Chimney Repair.
Chimney Cap Installation
Signs you need it
An open or missing flue tile visible from the ground, rainwater staining on the ceiling near the chimney chase, or birds and debris falling into the firebox.
What it costs in Irving Park
Chimney cap installation in Irving Park typically runs $250 to $600 depending on flue size and whether the existing crown needs a repair pad first.
How we do it
We measure the flue, select a properly sized stainless or Copperfield cap with the right mesh and draft profile, install it on a sound crown surface, and seal the fasteners against wind lift.
Chimney Liner Installation
Signs you need it
Spalling clay tile pieces in the cleanout or smoke chamber, a failed video inspection showing cracked or missing tile, or inspection flags on an oil-to-gas conversion.
What it costs in Irving Park
Chimney liner installation in Irving Park typically falls between $2,800 and $5,500, with the stair-stepped two-flat and three-flat flues on the higher end.
How we do it
We run a camera inspection first to size the flue and confirm the path, then pull a properly sized stainless liner – often DuraFlex – with insulation as needed, reconnect the appliances, and finish with a sealing cap.
What Chimney Repair Costs in Irving Park
| Item | Typical range in Irving Park |
|---|---|
| Chimney cap installation | $250 – $600 |
| Chimney cap replacement | $300 – $700 |
| Chimney liner installation | $2,800 – $5,500 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $500 – $1,200 |
Do I really need a new liner, or can it wait?
A cracked clay liner venting a gas furnace is a carbon monoxide path into the walls, not just an efficiency problem. If the camera shows tile gaps or the mortar between tiles is gone, repair rarely buys meaningful time – relining is the fix.
How long does a chimney liner last in Irving Park’s climate?
A properly sized stainless liner in Irving Park typically lasts 20 to 30 years. The freeze-thaw cycle matters less for the liner than for the brick and crown around it, but condensation control and a good cap go a long way.
Brands We Service in Irving Park
We work with a curated list of professional chimney brands, not whatever’s cheapest. HeatShield ceramic resurfacing, Gelco and Olympia Chimney components, and Famco venting parts are the ones you’ll see most in Irving Park, and we keep the common stock local so repair timelines stay tight. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Irving Park, IL
| Service | Typical range in Irving Park |
|---|---|
| Chimney sweep (standard gas flue) | $150 – $300 |
| Chimney sweep (two-flat or three-flat) | $200 – $400 |
| Dryer vent cleaning | $100 – $200 |
| Chimney cap installation | $250 – $600 |
| Chimney cap replacement | $300 – $700 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $500 – $1,200 |
| Chimney liner installation | $2,800 – $5,500 |
What pushes a Irving Park quote up is access – two- and three-flat work often means ladder time against a side wall, longer liner runs, or a crown that’s completely spalled and needs a full rebuild rather than a patch. We give you the full price in writing before work starts, and nothing gets added after the fact without you seeing the camera evidence that justifies it.
Neighborhoods We Serve in Irving Park
We work throughout the 60641 zip and the surrounding blocks. The names below are the areas we’re in most weeks, but if you’re just outside one of them and your chimney is acting up, call anyway – service area boundaries are not walls.
- The Villa
- Old Irving Park
- Independence Park area
- Kilbourn Park area
- West Walker
Service Area – Cities Near Irving Park
Crossroads Chimney Sweep is based in Belmont Cragin, IL and regularly works in the neighborhoods ringing Irving Park. We’re also in Portage Park, IL, Avondale, IL, and Logan Square, IL most weeks. If you’re anywhere along the Kennedy corridor, call and we’ll tell you straight whether we can fit you in.
Serving Irving Park, IL — Our Local Coverage Area
We’re based in the Irving Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Irving Park
Simple sweeps and cap installations generally don’t require a city permit, but liner replacements and structural repairs on two- and three-flats often do, especially when the flue serves multiple units. We handle the paperwork when it’s needed and will tell you before the work starts.
Inspection windows during the spring and fall selling season fill up in this area, but for time-sensitive real estate inspections we work to get the camera up the flue within a few business days. Call (877) 265-6720 and tell us the closing date so we can prioritize it correctly.
That’s more common than you’d think, especially after a flipped two-flat has had equipment relocated. We trace the flue path, identify every connected appliance, and confirm the liner is sized for the current setup before recommending any repair. It’s the first thing we do on most Irving Park service calls.
Crossroads Chimney Sweep has served Irving Park since 2014. If your chimney is in the 60641 and it’s been more than a year since anyone looked at it, call (877) 265-6720 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Park Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Carmen Guzman"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Shanice Dawson"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Miguel Torres